Wilden PS15

Specifications & selection

Air Inlet

3/4" FNPT

Liquid Inlet

76 mm (3")

Liquid Discharge

76 mm (3")

Connection Type

Tri-Clamp® DIN SMS

Valve Options

Ball

Max Suction Lift Capability

Full-Stroke Integral Piston – 3.8 m (12.5') Dry, 9.0 m (29.5') Wet PTFE Integral Piston – 3.3 m (10.8') Dry, 9.0 m (29.5') Wet EZ-Install TPE – 3.1 m (10.2') Dry, 9.0 m (29.5') Wet Full-Stroke PTFE – 4.0 m (13.1') Dry, 9.0 m (29.5') Wet Rubber – 4.4 m (14.5') Dry, 9.0 m (29.5') Wet

Max Flow Rate

Full-Stroke Integral Piston – 802 lpm (212 gpm) PTFE Integral Piston – 742 lpm (196 gpm) EZ-Install TPE – 844 lpm (223 gpm) Full-Stroke PTFE – 749 lpm (198 gpm) Rubber – 844 lpm (223 gpm)

Max Pressure

8.6 bar (125 psi)

Max Diameter Solids

Ball - 19.1 mm (3/4")

Displacement Per Stroke *

Full-Stroke Integral Piston – 2.5 L (0.65 gal) PTFE Integral Piston – 1.9 L (0.51 gal) EZ-Install TPE – 2.5 L (0.67 gal) Full-Stroke PTFE – 2.3 L (0.62 gal) Rubber – 2.7 L (0.72 gal) * 1 cycle = 2 strokes

Maximum flow and maximum pressure are separate performance limits and are not achieved simultaneously. Actual flow depends on the operating duty, air supply and selected configuration.