Wilden / Pro-Flo
Wilden P820/P830
51 mm (2") Pro-Flo Series Bolted Metal AODD Pump
Review the available specifications below, or send us your required duty and full configuration code for selection support.
Enquire about this pump ↗Find Wilden spare parts →PRODUCT DETAILS
Specifications & selection
- Air Inlet
- 1/2" FNPT
- Liquid Inlet
- 51 mm (2")
- Liquid Discharge
- 51 mm (2")
- Connection Type
- NPT/BSPT (Threaded) DIN/ANSI (Flanged)
- Max Suction Lift Capability
- Rubber – 7.4 m (24.3') Dry, 9.0 m (29.5') Wet EZ-Install TPE – 6.7 m (21.9') Dry, 9.0 m (29.5') Wet Full-Stroke PTFE – 6.9 m (22.6') Dry, 9.0 m (29.5') Wet Reduced-Stroke PTFE – 4.6 m (15.1') Dry, 9.0 m (29.5') Wet
- Max Flow Rate
- Rubber – 609 lpm (161 gpm) EZ-Install TPE – 605 lpm (160 gpm) Full-Stroke PTFE – 590 lpm (156 gpm) Reduced-Stroke PTFE – 492 lpm (130 gpm)
- Max Pressure
- 8.6 bar (125 psi)
- Max Diameter Solids
- 6.4 mm (1/4")
- Displacement Per Stroke *
- Rubber –2.8 L (0.74 gal) EZ-Install TPE – 2.5 L (0.67 gal) Full-Stroke PTFE – 2.5 L (0.65 gal) Reduced-Stroke PTFE – 1.7 L (0.46 gal) * 1 cycle = 2 strokes
Maximum flow and maximum pressure are separate performance limits and are not achieved simultaneously. Actual flow depends on air supply, discharge pressure, fluid properties and the selected configuration.
Confirm the configuration before ordering.
Send the complete pump code, required flow and pressure, liquid composition, temperature, viscosity and solids information. For replacement parts, include a nameplate photograph and the existing part number.
Contact our team →