Wilden / Saniflo FDA
Wilden P8
51 mm (2") Pro-Flo Saniflo FDA Series Clamped Metal AODD Pump
Review the available specifications below, or send us your required duty and full configuration code for selection support.
Enquire about this pump ↗Find Wilden spare parts →PRODUCT DETAILS
Specifications & selection
- Air Inlet
- 1/2" FNPT
- Liquid Inlet
- 64 mm (2-1/2")
- Liquid Discharge
- 64 mm (2-1/2")
- Connection Type
- Tri-Clamp®
- Max Suction Lift Capability
- Rubber – 6.9 m (22.7') Dry, 8.6 m (28.4') Wet TPE – 6.7 m (22.1') Dry, 8.6 m (28.4') Wet Full-Stroke PTFE – 6.7 m (22.1') Dry, 9.0 m (29.5') Wet Reduced-Stroke PTFE – 4.6 m (15.0') Dry, 9.5 m (31.0') Wet Ultra-Flex™ – 4.9 m (16.0') Dry, 8.8 m (29.0') Wet
- Max Flow Rate
- Rubber – 623 lpm (165 gpm) TPE – 630 lpm (166 gpm) Full-Stroke PTFE – 618 lpm (163 gpm) Reduced-Stroke PTFE – 496 lpm (131 gpm) Ultra-Flex™ – 526 lpm (139 gpm)
- Max Pressure
- 8.6 bar (125 psi)
- Max Diameter Solids
- 6.4 mm (1/4'')
- Displacement Per Stroke *
- Rubber – 2.6 L (0.70 gal) TPE – 2.8 L (0.75 gal) Full-Stroke PTFE – 2.6 L (0.70 gal) Reduced-Stroke PTFE – 1.67 L (0.44 gal) Ultra-Flex™ – 2.12 L (0.56 gal) * 1 cycle = 2 strokes
Maximum flow and maximum pressure are separate performance limits and are not achieved simultaneously. Actual flow depends on air supply, discharge pressure, fluid properties and the selected configuration.
Confirm the configuration before ordering.
Send the complete pump code, required flow and pressure, liquid composition, temperature, viscosity and solids information. For replacement parts, include a nameplate photograph and the existing part number.
Contact our team →