Wilden / Pro-Flo
Wilden P400
38 mm (1-1/2") Pro-Flo Series Bolted Plastic AODD Pump
Review the available specifications below, or send us your required duty and full configuration code for selection support.
Enquire about this pump ↗Find Wilden spare parts →PRODUCT DETAILS
Specifications & selection
- Air Inlet
- 1/2" FNPT
- Liquid Inlet
- 38 mm (1-1/2")
- Liquid Discharge
- 38 mm (1-1/2")
- Connection Type
- DIN/ANSI (Flanged)
- Max Suction Lift Capability
- Rubber – 5.5 m (18.2') Dry, 9.0 m (29.5') Wet TPE – 4.8 m (15.9') Dry, 9.3 m (30.6') Wet Full-Stroke PTFE – 5.7 m (18.7') Dry, 9.3 m (30.6') Wet Reduced-Stroke PTFE – 3.3 m (10.8') Dry, 9.7 m (31.8') Wet
- Max Flow Rate
- Rubber – 454 lpm (120 gpm) TPE – 454 lpm (120 gpm) Full-Stroke PTFE – 424 lpm (111.9 gpm) Reduced-Stroke PTFE – 318 lpm (84 gpm)
- Max Diameter Solids
- 6.35 mm (1/4'')
- Displacement Per Stroke *
- Rubber- 1.25 L (0.33 gal) TPE- 1.34 L (0.35 gal) Full-Stroke PTFE – 1.1 L (0.30 gal) Reduced-Stroke PTFE – 0.59 L (0.155 gal) * 1 cycle = 2 strokes
Maximum flow and maximum pressure are separate performance limits and are not achieved simultaneously. Actual flow depends on air supply, discharge pressure, fluid properties and the selected configuration.
Confirm the configuration before ordering.
Send the complete pump code, required flow and pressure, liquid composition, temperature, viscosity and solids information. For replacement parts, include a nameplate photograph and the existing part number.
Contact our team →