Wilden / Accu-Flo
Wilden A1
13 mm (1/2") Accu-Flo Clamped Plastic AODD Pump
Review the available specifications below, or send us your required duty and full configuration code for selection support.
Enquire about this pump ↗Find Wilden spare parts →PRODUCT DETAILS
Specifications & selection
- Air Inlet
- 1/4" FNPT
- Liquid Inlet
- 13 mm (1/2")
- Liquid Discharge
- 13 mm (1/2")
- Connection Type
- NPT/BSPT (Threaded)
- Max Suction Lift Capability
- Rubber – 6.05 m (20') Dry, 8.99 m (29') Wet PTFE – 5.18 m (17') Dry, 8.99 m (29') Wet
- Max Flow Rate
- Rubber – 39 lpm (10.3 gpm) PTFE – 39 lpm (10.3 gpm)
- Max Pressure
- 8.6 bar (125 psi)
- Max Diameter Solids
- 1.6 mm (1/16'')
- Displacement Per Stroke *
- Rubber – 0.12 L (0.031 gal) PTFE – 0.11 L (0.028 gal) * 1 cycle = 2 strokes
Maximum flow and maximum pressure are separate performance limits and are not achieved simultaneously. Actual flow depends on air supply, discharge pressure, fluid properties and the selected configuration.
Confirm the configuration before ordering.
Send the complete pump code, required flow and pressure, liquid composition, temperature, viscosity and solids information. For replacement parts, include a nameplate photograph and the existing part number.
Contact our team →